TH100 (Parts)
We provide a large range of spares to fit our variety of products. Most general parts can be purchased online, for any additional parts please call the office with the part number. Parts will be sent out within 1-2 working days, unless on backorder. All spares are sent tracked through TNT.
All our spares will be sent in recycled cardboard boxes, as we are trying to do our bit for the environment!
- Description
- Parts List
- MANUAL
Description
Our NEW hydraulic chipper is great for getting rid of unwanted brash. Its main uses include tidying up after hedge row clearances and chipping waste/wood for biomass boilers. Capable of chipping 3.5 inch wood depending on type of wood. The The TH100 has it’s own hydraulic system is independent. It has its own oil tank and does not need to be connected to the tractor.
No. | Name | Qty |
1 | Hopper | 1 |
2 | Pressing Plate | 2 |
3 | M 8 Nut | 8 |
4 | M 5 Nut | 1 |
5 | 8 Gasket | 12 |
6 | Guide Pipe | 1 |
7 | Hopper Cover | 1 |
8 | Compressing Bolt | 2 |
9 | M 8×25 Bolt | 4 |
10 | M 5×25 Bolt | 1 |
1 | Gear Box | 1 |
2 | Lock Thin Nut | 29 |
3 | Gasket | 46 |
4 | Cover Plate | 1 |
5 | Gear Box Bracket | 1 |
6 | Spring Washer | 16 |
7 | Screw Bolt | 22 |
8 | Coupling | 1 |
9 | Lock Thin Nut | 8 |
10 | Gasket | 8 |
11 | Square Bearing | 2 |
12 | Screw Bolt | 8 |
13 | Cover Plate | 2 |
14 | Side Cover Plate | 1 |
15 | Blade Disc | 1 |
16 | Main Case | 1 |
17 | Bolt | 1 |
18 | Compressing Bolt | 1 |
19 | Pull Rod | 1 |
20 | Lock Thin Nut | 5 |
21 | Gasket | 2 |
22 | Screw Bolt | 3 |
23 | Lock Thin Nut | 2 |
24 | Nut | 3 |
25 | Washer | 2 |
26 | Gasket | 2 |
27 | Screw Bolt | 3 |
28 | Input Hopper | 1 |
29 | Step Bolt | 4 |
30 | Gasket | 2 |
31 | Lock Thin Nut | 1 |
32 | Elastic Cylindrical Pin | 1 |
33 | Spring Washer | 4 |
34 | Large Flat Gasket | 1 |
35 | Roller | 1 |
36 | Nut | 1 |
37 | Cover Plate | 1 |
38 | Screw Bolt | 3 |
39 | End Clamp Plate | 1 |
40 | Extension Spring | 1 |
41 | Side Cover | 1 |
42 | Shaft Sleeve | 1 |
43 | Pedestal For Motor | 1 |
44 | Coupling | 1 |
45 | Pedestal | 1 |
46 | Nut | 2 |
47 | Spring Washer | 2 |
48 | Bolt | 2 |
49 | Lock In | 2 |
50 | 60X60 End Cap | 2 |
1 | Oil Tank | 1 |
2 | M16 Bonded Washer | 2 |
3 | Oil Leveler | 1 |
4 | Seal Ring | 1 |
5 | Oil Sucking Pipe | 1 |
6 | Oil Outlet Pipe | 1 |
7 | Oil Return Pipe | 1 |
8 | Oil Pipe | 2 |
9 | M18x1.5-G1/2x14 | 2 |
10 | Hydraulic Motor | 1 |
11 | Bolt | 2 |
12 | Spring Washer | 2 |
13 | Cover Plate | 2 |
14 | Duplex Pipe Clamp | 2 |
15 | Control Valve | 1 |
16 | Gasket | 2 |
17 | Bolt | 1 |
18 | Connect Fork | 1 |
19 | Nut | 2 |
20 | Pull Rod | 1 |
21 | Lock Thin Nut | 1 |
22 | Knuckle Bearing | 1 |
23 | Gasket | 1 |
24 | Lock Thin Nut | 1 |
25 | Joystick | 1 |
26 | Cap | 2 |
27 | Oil Return Pipe | 1 |
28 | Oil Filter | 1 |
29 | Pipeline | 1 |
30 | Oil Pump | 1 |
31 | Pump Support | 1 |
32 | M16X1.5 Breather Plug | 1 |
33 | Screw Bolt | 4 |
34 | Spring Washer | 4 |
35 | Gasket | 4 |
36 | Oil Tank Cap | 1 |
37 | Seal Pad | 1 |
1 | Three Link | 1 |
2 | M18x1.5-G1/2x14 | 4 |
4 | Bolt | 1 |
5 | G1/2-M18x1.5 | 1 |
6 | Reversing Valve | 1 |
7 | M18X1.5-G3/8 Joint | 2 |
8 | Cap Screw | 2 |
9 | Cotter Pin | 1 |
10 | Pin Shaft | 1 |
11 | Valve Rod Connect Fork | 1 |
12 | Cap Screw | 2 |
13 | Spring Washer | 2 |
14 | Pressing Plate | 1 |
15 | Cotter Pin | 1 |
16 | Running Pulley | 1 |
17 | Pin Shaft | 1 |
18 | 8(L=2) Nylon Washer | 4 |
19 | Gasket | 2 |
20 | 8X12-M6 Shaft Bolt | 2 |
21 | Lock Thin Nut | 6 |
22 | Gasket | 8 |
23 | Pulling Plate | 1 |
24 | Valve Control Board | 1 |
25 | 12 Steel Ball | 1 |
26 | Pressure Spring | 1 |
27 | Screw Bolt | 2 |
28 | Compress Cover | 1 |
29 | Thin Nut | 1 |
30 | Half Thread Bolt | 1 |
31 | Screw Bolt | 2 |
32 | Lock Thin Nut | 3 |
33 | Gasket | 1 |
34 | Valve Mounting Plate | 1 |
1 | Key | 1 |
2 | Pump Drive Shaft | 1 |
3 | Oil Cup | 1 |
4 | Bearing Pedestal | 1 |
5 | RS Deep Groove Ball Bearing | 2 |
6 | Spacer Bush | 1 |
7 | Circlip For Shaft | 1 |
8 | Circlip For Hole | 1 |
9 | Oil Pump | 1 |
10 | O Seal | 1 |
11 | Spring Washer | 4 |
12 | Cap Screw | 4 |
1 | M 10×30 Bolt | 6 |
2 | Blade | 8 |
3 | Sleeve | 10 |
4 | 10 Washer | 6 |
5 | Blade | 2 |
6 | 8×7X30 Key | 2 |
7 | Pin Shaft | 2 |
8 | 3.2×16 Pin | 4 |
9 | 18 Flat Gasket | 4 |
10 | Blade Rest | 1 |