£4 – £264 inc VAT
Flail Topper Hedge Cutter (Parts)
We provide a large range of spares to fit our range of products. Most general parts can be purchased online, for any other parts please call the office with the part number. Parts will be sent out within 1-2 working days, unless on backorder. All spares are sent tracked through TNT.
All our spares will be sent in recycled cardboard boxes, as we are trying to do our bit for the environment!
- Description
- PARTS LIST
- MANUAL
Description
Our best-selling hedge and verge cutting system. Simple to operate, and great for tackling overgrown vegetation and general maintenance of hedgerows and verges.
Includes flail head and scissor trimmer bar. The flail head is ideal for tackling heavier or more overgrown vegetation (hawthorn bramble etc,), and it’s also great for trimming verges and smaller areas of grass. Changing over to the scissor bar takes less than 5 minutes, and this creates a super tidy finish on dense and leafy hedgerows such as leylandii, privet, conifers etc.
| No. | Name & Spec | QTY |
| 1 | short hand shank | 4 |
| 2 | Joystick(short) | 4 |
| 3 | Thin nut | 4 |
| 4 | Shifting block | 4 |
| 5 | Protecting bush | 4 |
| 6 | hexagon socket cap screw | 8 |
| 7 | B cylindrical pin | 4 |
| 8 | Upper cover | 4 |
| 9 | Flange bush | 8 |
| 10 | Pull rod 2 | 1 |
| 11 | Pull rod 1 | 3 |
| 12 | Check ring | 6 |
| 13 | Release spring | 3 |
| 14 | shell | 3 |
| 15 | Lock hole shell | 1 |
| 16 | Bulb hand shank | 1 |
| 17 | Lock joystick | 1 |
| 18 | inner hexagon set screw | 1 |
| 19 | Plain washer | 4 |
| 20 | hexagon locking thin nut | 4 |
| 21 | fixed seat 2 | 1 |
| 22 | bush | 1 |
| 23 | O sealing | 1 |
| 24 | Lock shaft | 1 |
| 25 | Locating sleeve | 10 |
| 26 | Fixed seat 1 | 1 |
| 27 | Screw rod | 2 |
| 28 | Lower cover | 4 |
| 29 | hexagon socket cap screw | 16 |
| 30 | Lower cover | 4 |
| 31 | hexagon socket cap screw | 8 |
| 32 | dragline | 4 |
| 33 | flange | 4 |
| 34 | Pressure casting | 3 |
| 35 | flaring pressure casting pipe | 1 |
| 36 | Aluminum connector | 4 |
| 37 | pin | 4 |
| 38 | Label plate | 1 |
| 39 | label | 1 |
| 1 | hexagon locking thin nut | 4 |
| 2 | Plain washer | 8 |
| 3 | Screw bolt | 4 |
| 4 | hitch frame weldment | 1 |
| 5 | Hood weldment | 1 |
| 6 | Head board | 1 |
| 7 | Screw bolt | 4 |
| 8 | Plain washer | 8 |
| 9 | hexagon locking thin nut | 8 |
| 10 | shaft end cover plate | 1 |
| 11 | hexagon locking thin nut | 13 |
| 12 | Plain washer | 13 |
| 13 | Screw bolt | 5 |
| 14 | rubber board | 1 |
| 15 | Pressing bar | 1 |
| 16 | Screw bolt | 4 |
| 17 | motor guard board | 1 |
| 18 | hexagon socket cap screw | 6 |
| 19 | Spring washer | 3 |
| 20 | motor oil in and out connector | 2 |
| 21 | O sealing | 2 |
| 22 | hexagon socket cap screw | 4 |
| 23 | Spring washer | 10 |
| 24 | Hydraulic motor | 1 |
| 25 | splined hub | 1 |
| 26 | motor positioning plate | 1 |
| 27 | A checking ring | 1 |
| 28 | A shaft checking ring | 1 |
| 29 | Deep groove ball bearing | 2 |
| 30 | Oil sealing check ring | 2 |
| 31 | FB oil seal | 2 |
| 32 | Oil cup | 4 |
| 33 | Screw bolt | 8 |
| 34 | Main bearing seat | 1 |
| 35 | half thread bolt | 16 |
| 36 | blade | 32 |
| 37 | blade buckle | 16 |
| 38 | hexagon locking thin nut | 20 |
| 39-1 | Blade shaft | 1 |
| 39-2 | Blade shaft | 1 |
| 39-3 | Blade shaft | 1 |
| 40 | second bearing seat | 1 |
| 41 | Locking gasket | 1 |
| 42 | Spring washer | 1 |
| 43 | Screw bolt | 1 |
| 44 | End cap | 1 |
| 45 | Plain washer | 3 |
| 46 | Screw bolt | 3 |
| 47 | Plain washer | 4 |
| 48 | roller shaft seat 1 | 1 |
| 49 | inner hexagon sunk screw | 2 |
| 50 | Screw bolt | 2 |
| 51-2 | Roller weldment (AM80) | 1 |
| 51-3 | Pulley weldment（AM100） | 1 |
| 52 | Roller shaft 2 | 1 |
| 1 | fuel tank cover | 1 |
| 2 | Air plug M16X1.5 | 2 |
| 3 | Fuel tank | 1 |
| 4 | Liquid level meter | 1 |
| 5 | End cover | 3 |
| 6 | Middle R pin | 4 |
| 7 | D square cotter | 3 |
| 8 | Support leg 2 | 2 |
| 9 | Screw bolt | 4 |
| 10 | Plain washer | 9 |
| 11 | hexagon locking thin nut | 9 |
| 12 | Down hook plate 1 | 1 |
| 13 | Down hook plate 1 | 1 |
| 14 | Down pull rod pin shaft | 2 |
| 15 | Lock pin assembly | 5 |
| 16 | Lifting eye weldment | 1 |
| 17 | connecting lever weldment | 1 |
| 18 | articulation bolt | 2 |
| 19 | PTO shaft cover | 1 |
| 20 | Extra-large plain washer | 10 |
| 21 | Spring washer | 5 |
| 22 | Screw bolt | 5 |
| 23 | Adjusting pull rod | 3 |
| 24 | upper pull rod pin shaft weldment | 1 |
| 25 | fin thread screw bolt | 4 |
| 26 | Spring washer | 4 |
| 27 | Half screwed bolt | 3 |
| 28 | gear box fixed plate | 1 |
| 29 | Spacer bush | 3 |
| 30 | Support leg 1 | 1 |
| 31 | half thread bolt | 2 |
| 32 | Three joint forks | 1 |
| 33 | hexagon locking thin nut | 3 |
| 34 | Plain washer | 8 |
| 35 | Screw bolt | 3 |
| 36 | Upper hook frame | 1 |
| 37 | bed frame weldment | 1 |
| 38 | oil pump transmission box | 1 |
| 39 | transition connecting plate | 1 |
| 40 | Hexagon socket cap screw | 2 |
| 41 | Hexagon socket cap screw | 2 |
| 42 | Plain washer | 4 |
| 1 | Articulation bolt | 3 |
| 2 | Small support arm | 1 |
| 3 | Plain washer | 9 |
| 4 | hexagon locking thin nut | 9 |
| 5 | Articulation bolt | 4 |
| 6 | pushing pull plate | 1 |
| 7 | Plain washer | 7 |
| 8 | hexagon locking thin nut | 7 |
| 10 | Articulation bolt | 1 |
| 11 | Plain washer | 1 |
| 12 | hexagon locking thin nut | 1 |
| 13 | Swing arm | 2 |
| 14 | Swing arm cylinder | 1 |
| 15 | Middle R pin | 4 |
| 16 | Lock pin | 1 |
| 17 | nut with cap | 8 |
| 18 | Extra-large plain washer | 10 |
| 19 | Screw rod | 4 |
| 20 | Oil tub clip | 8 |
| 21 | Pressing plate | 4 |
| 22 | Hexagon nut | 8 |
| 23 | oil tube short cover | 1 |
| 24 | Hexagon socket cap screw | 1 |
| 25 | buffering limited block | 1 |
| 26 | big support arm | 1 |
| 27 | oil tube long cover | 1 |
| 28 | Smaller arm cylinder | 1 |
| 29 | big arm cylinder | 1 |
| 30 | Bonded washer 14.7X22X1.5 | 1 |
| 31 | Breathe filter | 1 |
| 32 | Articulation bolt | 3 |
| 1 | Three-way valve | 1 |
| 2 | half thread bolt | 5 |
| 3 | inner hexagon tapered plug | 1 |
| 4 | oil in and out connector | 3 |
| 5 | connector M18X1.5-G3/8 | 6 |
| 6 | valve throttle connector | 2 |
| 7 | Bonded washer14.7X22X1.5 | 14 |
| 8 | Hinge joint bolt | 6 |
| 9 | Plain washer | 5 |
| 10 | hexagon locking thin nut | 5 |
| 11 | Return oil filter | 1 |
| 12 | M18X1.5(both end) adapter | 1 |
| 13 | O sealing ring | 1 |
| 14 | Bonded washer M42 | 1 |
| 15 | Oil filter adapter | 1 |
| 16 | Air plug M16X1.5 | 1 |
| 17 | Bonded washer M16 | 1 |
| 18 | Fuel tank cap | 1 |
| 19 | fuel tank sealing gasket | 1 |
| 20 | Screw bolt | 4 |
| 21 | Spring washer | 4 |
| 22 | Plain washer | 4 |
| 23 | Single valve | 1 |
| 24 | oil pump inlet tube | 1 |
| 25 | Transition connector M18X1.5-G1/2X14 | 2 |
| 26 | Duplex gear pump | 1 |
| 27 | oil pump oil inlet adapter | 1 |
| 28 | hexagon socket cap screw | 4 |
| 29 | Spring washer | 4 |
| 30 | Swing arm cylinder | 1 |
| 31 | Small arm cylinder | 1 |
| 32 | Big arm cylinder | 1 |
| 33 | Swing arm cylinder tube | 2 |
| 34 | small arm cylinder tube | 2 |
| 35 | oil pump to triple valve tube | 1 |
| 36 | big arm cylinder tube | 1 |
| 37 | triple valve outlet tube | 1 |
| 38 | motor oil return tube | 1 |
| 39 | motor oil filling tube | 2 |
| 40 | single valve to oil filter tube | 1 |
| 41 | oil pump outlet tube | 1 |
| 42 | hexagon socket cap screw | 6 |
| 43 | Spring washer | 6 |
| 44 | motor oil in and out connector | 2 |
| 45 | O sealing ring | 2 |
| 46 | Hydraulic motor | 1 |