37 Ton Megga Splitter (Parts)
We provide a large range of spares to fit our range of products. Most general parts can be purchased online, for any other parts please call the office with the part number. Parts will be sent out within 1-2 working days, unless on backorder. All spares are sent tracked through TNT.
All our spares will be sent in recycled cardboard boxes, as we are trying to do our bit for the environment!
- Description
- Parts List
- MANUAL
Description
The MDL Mega splitter 37Ton packs a massive splitting punch. Easy to convert from horizontal or vertical position, off-road towable, with a 15hp Petrol mounted engine. Two handled controls for safe operation. The 37 Ton splitter uses a large diameter ram to provide huge force to split larger, harder, logs. It’s virtually unstoppable! Perfect for splitting logs for a living or just a affordable option for your own log fires. This machine is off-road towable, making it easy to transport from A to B.
Serial No. | N&M | Type | Quantity |
1 | Main Beam | 1 | |
2 | Cylinder 5 inch | 1 | |
3 | Cylinder pin | 1 | |
4 | Retract wedge | 1 | |
5 | Bolt | M12X40 | 4 |
6 | Nut | M12 | 4 |
7 | Vertical Blade | 1 | |
8 | Right Horizontal Blade | 1 | |
9 | Left Horizontal Blade | 1 | |
10 | Frame Slide Bottom Plate | 2 | |
11 | Bolt | 7/16-14X2" | 10 |
12 | Self-locking Nuts | 7/16-14 | 11 |
13 | Bolt M12X40 | M12X40 | 4 |
14 | Nut M12 | M12 | 4 |
15 | Bolt | 7/16-14x2.25" | 1 |
16 | Grease fitting | M8X1 | 2 |
17 | Cotter pin | 4X50 | 2 |
Serial No. | N&M | Type | Quantity |
1 | Tongue Assembly | 1 | |
2 | Tow Hitch | 2" | 1 |
3 | Bolt | M12X75 | 2 |
4 | Tongue strenthen tube | 2 | |
5 | Self-locking Nuts M12 | M12 | 2 |
6 | Pin | 1 | |
7 | Pin spring | 1 | |
8 | Eyebolt M10 | M10 | 1 |
9 | Flat washer | 34x11x2.5 | 1 |
10 | Flat washer | 40x23x2 | 1 |
11 | B snap ring | 1 | |
12 | Tongue set pin | 1 | |
13 | Cotter pin | 4X50 | 1 |
14 | D pin | 2 | |
Serial No. | N&M | Type | Quantity |
1 | Hydraulic tank | 1 | |
2 | Bolt | M12X80 | 2 |
3 | Self-locking Nuts | M12 | 2 |
4 | Oil scale | 1 | |
5 | Hose Nipple | 3/4"NPT | 1 |
6 | Crossover Coupling | 1 | |
7 | Inlet filter | 1 | |
8 | Plug screw | 1/2"NPT | 1 |
9 | Nut | 1"-14 | 2 |
Serial No. | N&M | Type | Quantity |
1 | Engine Lifan 13HP | 1 | |
2 | Pump 16GPM | 1 | |
3 | Engine Coupling Hub | 1 | |
4 | Elastomer | 1 | |
5 | Pump Coupling Hub | 1 | |
6 | Bolt | 4 | |
7 | Pump housing | 1 | |
8 | Coupler housing cover | 1 | |
9 | Bolt | M5X10 | 4 |
10 | Bolt | M8X25 | 4 |
11 | Coupler housing pad | 1 | |
12 | Bolt | M8X20 | 4 |
Serial No. | N&M | Type | Quantity |
1 | Hydraulic Fitting #1 - Cylinder to Valve | 1 | |
2 | Hydraulic Fitting #2 - Bottom of Valve/Top of Pump - 90 degree | 3 | |
3 | Hydraulic Fitting #3- Side of Valve - 90 degree | 1 | |
4 | Hydraulic Fitting #4 - Top of Cylinder - 90 degree | 1 | |
5 | Rear support leg | 1 | |
6 | Front support leg | 1 | |
7 | Carton | 1 | |
Serial NO. | N&M | Type | Quantity |
1 | Log cradle | 2 | |
2 | Valve | 1 | |
3 | Fender | 2 | |
4 | Wheel | 2 | |
5 | Hose #3 - Output from Valve to Piston | 1 | |
6 | Hose #2 - Input from Pump to Valve | 1 | |
7 | Hose #4- Return from Valve to Tank | 1 | |
8 | Hose #1 - From Tank to Pump | 1" | 1 |
9 | Hose clamp | 35 | 2 |